Categories

Converter specifications:

• Input voltage: 10V - 60V DC
• Controlled power: 0.1-1200W
• Rated output current: up to 15A
• Maximum output current: 20A
• Standby consumption: 10mA
• PWM operating frequency: 25kHz
• PWM range: 0-100%
• Operating temperature: -40 - +85 °C
• Dimensions: 77x45x29mm
• Mounting holes: four, 3mm

Converter specifications:

• Input voltage: 10V - 55V DC

• Controlled power: 0.1-3000W

• Maximum power:
  • 12V-720W

  • 24V-1440W

  • 36V-2160W

  • 48V-2880W

  • 50V-3000W

• Rated output current: up to 30A

• Maximum output current: 60A

• Standby consumption: 10mA

• PWM operating frequency: 15kHz

• PWM range: 0-100%

• Operating temperature: -40 - +85 °C

• Dimensions: 120x95x28mm

• Mounting holes: four pieces, 3mm, the metal housing also allows vertical mounting

• Driver interfaces: X, Y, Z, E0, E1 – 5 drivers
• Control of 2 MOSFET transistors for heating up to 2 extruders – E0, E1 ,led out to screw terminals
• Control of 1 MOSFET for bed heating, up to 20A, led out to screw terminal
• Cooling: common heatsink for the 3 powerful MOSFET transistors
• Fan outputs: on screw terminal, PWM control, only when using 1 extruder
• Support for 6 endstops: X, Y, Z
• 3 pins for thermistors – T0 ,T1, T2 - 100k NTC

Technical specifications:

Power supply: DC 4.8V – 6.0V

Output signal: 1.5ms ± 0.5ms

Channels: 3CH

Dimensions: approx. 35 × 30 × 15 mm

Weight: 0.010 kg

Board specifications:

• Input voltage: 5V USB or 10-30VDC input jack

• Operating voltage: 3.3V, but pins are 5V logic tolerant

• Connector types: USB-B-MINI or DC connector 5.5x2.1mm

• Microcontroller: LPC1768– 32-bit, 100MHz frequency

• Programmable flash memory: 512 kB

• SRAM memory : 64kb

• Analog inputs: 8 units, 12-bit ADC

• Digital input/output pins: 36 (6 of which are PWM)

• UART ports: 4 hardware serial ports

• LAN: built-in network support

• USB communication: built into the LPC1768 microcontroller

• Maximum allowable current per input/output pin: 20mA

• Buttons: RESET button for easy restart
• Dimensions: 73mm x 54mm x 17mm

Technical specifications:

Product type: Belt-driven gear reducer

Gear ratio: 5:1

Tooth type: Helical (angled)

Tooth module: M 1.5

Compatible motor: Nema 34 stepper motor / servo motor

Input shaft: Ø14 mm

Output shaft: Pinion for module 1.5

Housing material: Aluminium alloy (anodised)

Gear material: Hardened steel

Belt type: HTD 5M timing belt

Operating noise: Low (< 60 dB)

Efficiency: Up to 96%

Compatibility: Gear rack + pinion kit

Weight: 1.900 kg

Model - EX-8080A

A - 77 mm

B - 77 mm

C - 9 mm

D - 6 mm

E - 8 mm

Weight - 0.140 kg

Model - EX-1026

A – 35 mm

B – 28 mm

C – 6.5 mm

D – 8 mm

Weight – 0.026 kg.

Compatibility code – 3030A-8

Model - EX-1028

A – 58 mm

B – 28 mm

C – 6.5 mm

D – 8 mm

E – 5 mm

Weight – 0.060 kg

Compatibility code – 3060C-8A

Model - EX-1014

A – 80 mm

B – 36 mm

C – 9 mm

D – 8 mm

E – 6 mm

Weight – 0.142 kg

Compatibility code – 4080C-8

Specifications of RF Transmitter XD-FST:

- Supply voltage: 3.5V-12V

- Current consumption: up to 40mA

- Communication speed: up to 10Kbps

- Frequency range: 433MHz

- Radiated power: 10mW

- Transmission range: 20-200m, depends on the supply voltage

- Signal modulation: ASK – Amplitude Shift Keying

- Operating temperature: -40ºC to +85ºC

- Dimensions: 19mm x 19mm

Specifications of RF Receiver XD-RF-5V:

- Supply voltage: 5V

- Current consumption: up to 6mA

- Communication speed: up to 10Kbps

- Frequency range: 433MHz

- Sensitivity: -105dB

- Signal modulation: ASK – Amplitude Shift Keying

- Operating temperature: -40ºC to +85ºC

- Dimensions: 30mm x 14mm

The rotating nut adapter is used in machines where a longer stroke is required and where screw rotation is not feasible due to whip vibrations. Our product overcomes this problem by keeping the screw stationary while only the nut rotates, thus enabling the implementation of long-stroke machines while retaining all the advantages of using screws. The advantages of the screw compared to other drive methods, such as rack and pinion, belt, or chain drives, are that the screw maintains high positioning accuracy, high driving force, and high linear thrust.

Board specifications:

• Supply voltage: 5V supplied via the pin headers

• Current consumption: 40mA

• Communication protocol: Bluetooth V2.0

• Communication speed: 2.1Mb/s

• Power level: Class 2, +6dBm

• Frequency range: 2.4GHz – 2.48GHz, ISM frequency band

• Receiver sensitivity: -85dBm

• USB communication protocol: USB v1.1/2.0

• Security: Authentication and encryption

• Operating temperature: -20ºC to +55ºC

• Connector types: 2.54mm pin header

• 14 digital input/output pins: 6 of which are PWM

Model: 130SFM-E07725-2B6 + KA10

Motor type : Nema 43

Phase: single-phase

Power supply: 220V

Power: 2 kW

Encoder: 2500 pulses per revolution

Maximum torque: 22 Nm

Rated torque: 7.7 Nm

Shaft diameter - 22 mm

Cable length - 3 metres

Driver: KA10

Weight: 11.6 kg