Categories

Relay module specifications:

1. Input voltage: 5V DC – pins DC+, DC-, IN

2. Relay load capacity

- 10A 250VAC

- 10A 125VAC

- 10A 30VDC

- 10A 28VDC

3. Rated consumption: up to 200mA

4. Standby consumption: 10mA

5. Mounting holes: 4 holes, 3mm

The board offers individual control of two electromagnetic relays, with load circuits of 10A at 250V. The control pins are isolated by optocouplers, ensuring high safety and guaranteeing that no spikes will appear in the control electronics. The board is powered by supplying 5V to DC+ and GND to DC-. The control pin levels are 5V tolerant. The control pins are driven by active high/low voltage, set by jumpers S1 and S2. Position H sets active high voltage, and position L sets active low voltage. The relay interfaces have normally open circuits. All three relay outputs are brought out to the output terminal – normally closed, common, and normally open, marked as NC, COM and NO.

Model: SO-HE-024

Base and cap material: aluminium die-cast

Colour: grey

Connector locking type: steel locking mechanism

Protection rating of locked connector: IP65

Sealing material: NBR

Connection type: screw terminal

Weight: 0.440 kg

Number of teeth: 26

Inner hole diameter: 5 mm

Outer diameter: 11 mm

Height: 11 mm

Fixing screw: internal hexagon M3

Material: Brass

Weight: 0.005 kg

Board specifications:

• Supply voltage: 4 AA batteries, approx. 6V

• Compatibility with UNO R3: Mounting holes

• Wheel diameter: 67mm

• Module height: 34mm

• Electric motor parameters:
  • Soldered cables + and –

  • Bidirectional movement

  • Gear ratio: 48:1

  • Speed: approx. 0.65m/s

  • Recommended supply voltage: 5 - 10V

  • Current consumption: 100mA/3V, 120mA/6V

  • Dimensions: ~215mm x ~150mm

A – 40 mm

B – 30 mm

A 1 – 25 mm

A 2 – 11 mm

A 3 – 6.75 mm

C - M 4

RPM - 18000

Torque - 16

Clamping - collet

Weight - 0.058 kg

Shaft diameters (B1 and B2) - 6, 6.35, 8, 10, 12, 14, 16

We offer combinations of all types!

Specifications of hotend:

• Material: brass
• Filament size: 1.75mm
• Nozzle size: 0.4mm
• Weight: 0.280 kg

Model – EX7400-25

Operating voltage – 12V

Length – 30 mm

Width – 30 mm

Height – 32 mm

Cable length - 30 cm

Weight – 0.015 kg

Extruder specifications:

• Gear ratio: 3:1
• Compatible hotend: E3D
• Compatible stepper motor: NEMA17
• Filament size: 1.75mm
• Operating temperature: 80°C
• Weight: 0.075 kg

Number of teeth: 40

Inner hole diameter: 5 mm

Outer diameter: 11 mm

Height: 11 mm

Set screw: internal hex M3

Material: Brass

Weight: 0.005 kg

Model - EXAP4530

A – 60

B – 22

C – 6.5

D – 6

E – 45^o

Weight – 0.032 kg.

Model - EXAP4540

A – 60

B – 32

C – 9

D – 6

E – 45^o

Weight – 0.046 kg.

Model – EX7400-27

Operating voltage – 12V

Length – 60 mm

Width – 60 mm

Height – 15 mm

Cable length - 25 cm

Weight – 0.030 kg