Categories

Technical specifications:

Model: SAR2000-02

Series: SAR (Relief type air pressure regulator)

Connection: PT 1/4

Gauge port: PT 1/8

Operating pressure: 0.05 – 0.85 MPa

Maximum pressure: 1 MPa

Operating temperature: from 5°C to 60°C

Operating medium: Compressed air

Body: Aluminium alloy

Flow rate: approx. 550 L/min (at 0.7 MPa)

Weight: 0.280 kg.

Technical specifications:

Model: 4M230-08E

Type: Pneumatic solenoid valve

Positions: 5/3 (5 ports, 3 positions)

Voltage: DC 24V

Connection: G 1/4

Operating medium: compressed air (filtered ~40 µm)

Operating pressure: ~ 0.15 – 0.8 MPa

Max. pressure: up to ~ 1.2 MPa

Operating temperature: -20°C to +70°C

Power consumption: ~ 3–5 W (DC24V)

Protection rating: IP65

Material: aluminium housing

Control type: pilot-operated

Weight: 0.370 kg.

Technical specifications:

ü  machine working travel – 2000x1000mm

ü  vacuum table size – 2000x1000mm

ü  ability to control:

a.       number of passes for the whole workpiece – maximum 3 passes

b.      working tool speed

c.       switch – zig – zag and parallel movement

d.      oscillation on/off

e.       oscillation width

f.        speed adjustment

g.      display of current speed

ü  start/stop button

ü  zero position button

ü  vacuum start button

ü  protective bellows on the rail guides

ü  working attachment change system – grinding and polishing

Features:

Compatible with 5V, 3.3 V

Input voltage: 6.5-12V (DC) or USB power supply

Output voltage: 3.3 V, 5V switchable

Maximum output current: < 700 mA

Bidirectional independent control

Can be switched to 0V, 3.3V, 5V

Built-in two sets of 3.3V, 5V DC output pins.

Diameter (d) – 16 mm

Pitch (s) – 5 mm

Fixed screw processing – 1 piece

Floating screw processing – 1 piece

Dear customers,

please note that the specified screw dimensions refer to the overall length, not the working stroke!

Board specifications:

• Input voltage: 5V on pin VCC or 7-12V on pin RAW
• Connector types: plated through-holes with 2.54mm pitch
• Microcontroller: ATmega328P-AU – 8-bit, 16MHz frequency
• Flash memory: 32kb
• EEPROM memory: 1kb
• 2kb SRAM memory
• 8 analog inputs: A0-A7, 10-bit ADC
• 14 digital input/output pins: 6 of which are PWM
• Maximum allowable current per input/output pin: 20mA
• Chip for USB communication: not present on the board
• Dimensions: 33mm x 18mm
• Weight: 0.026 kg

Technical specifications:

Model: FA 1:2.0-1/1.8 C

Mount type: C-mount

Focal length: 6, 7 – 36, 8, 16, 25, 35, 50 mm

Aperture: F1.2 – F22

Focusing: Manual

Iris control: Manual

Sensor size: up to 2/3"

Minimum focusing distance: approx. 0.3 m

Filter thread: M37 x 0.75 mm

Dimensions: Ø40 × 70 mm

Material: Metal housing

Weight: 150 g

This bellows protects the linear guide rail from dust and chips. Following the profile of the guide, it ensures both attachment to the rail and smooth movement when extending and retracting. The ends finish with Velcro on thickened plastic strips with the possibility of drilling and bolt mounting on your side.

Material – polymer

Colour - black

Length in extended state – 1 or 2 m.

Length in retracted state for 1 metre – 10.5 cm.

Length in retracted state for 2 metres – 19 cm.

Weight – 0.170 / 0.310 kg

This bellows protects the linear guide rail from dust and swarf. Following the profile of the guide, it ensures both attachment to the rail and smooth movement during extension and retraction. The ends finish with Velcro on thickened plastic strips with the possibility of drilling and bolt mounting on your side.

Material – polymer

Colour - black

Length in extended state – 1 or 2 m.

Length in compressed state for 1 metre – 10 cm.

Length in compressed state for 2 metres – 19 cm.

Weight – 0.220 / 0.400 kg

Specifications:

• Input voltage: 3.3V - 5V DC
• Screw terminals
• 2.54mm pin headers
• Over 250 holes available for connecting components
• Power indicator LED
• RESET button
• Operating temperature: -20 - +70 °C
• Dimensions: compatible with Arduino boards
• Mounting: on Arduino board, compatible screw holes available

Model: EXPTFE

Outer diameter: 4 mm

Inner hole diameter: 2 mm

Operating temperature: from -190 ℃ to 280 ℃

Colour: White

Approximate weight per 1 m.: 0.113 kg.

The product is sold by the metre — when adding to the cart, select the number of metres you wish to receive as a single continuous piece!

Pulse extender  is a device for extending rectangular pulses and increasing their amplitude. It consists of a microcontroller board housed in a metal enclosure, convenient for mounting. Connection to the device is made via screw terminals, which are also plug terminals. There are two terminals – input and output. The maximum level of input pulses is 5V. Upon detecting a rising edge of a rectangular pulse, the microcontroller generates another pulse with a defined duration and amplitude. The pulse duration depends on the device settings. It is adjusted using a 4-channel DIP switch located next to the input terminal. There are 4 switches, allowing 16 combinations for the length of the output pulse.