Categories

Model – BF 12

d1 – 10

L – 20

B – 60

H – 43

b ±0.02 – 30

h ±0.02 – 25

B1 – 34

H1 – 32.5

E – 18

P – 46

d2 – 5.5

X – 6.6

Y – 10.8

Z – 1.5

Weight - 0.270 kg

Model – BF 15

d1 – 15

L – 20

B – 70

H – 48

b ±0.02 – 35

h ±0.02 – 28

B1 – 40

H1 – 38

E – 18

P – 54

d2 – 5.5

X – 6.6

Y – 11

Z – 6.5

Weight - 0.356 kg.

Model – BF 20

d1 – 20

L – 26

B – 88

H – 60

b ±0.02 – 44

h ±0.02 – 34

B1 – 52

H1 – 50

E – 22

P – 70

d2 – 6.6

X – 9

Y – 14

Z – 8.5

Weight - 0.670 kg.

Model – BF 25

d1 – 25

L – 30

B – 106

H – 80

b ±0.02 – 53

h ±0.02 – 48

B1 – 64

H1 – 70

E – 33

P – 85

d2 – 9

X – 11

Y – 17.5

Z – 11

Weight - 1.330 kg

Model - ZM-BL4815F

Supply voltage: 24 - 48V DC

Input power: 720 W

Operating temperature: 0°C – 50°C

Maximum rotation speed: 8000 rpm

High torque at low speeds

Control pins for enable and direction: EN, DIR

Alarm output signal: ALM

Speed output signal

Dimensions: 150 x 98 x 53 mm

Weight: 0.600 kg

Model: 57BL S 002

Type: dual shaft

Number of poles: 8

Phase-to-phase resistance: 0.9 ohms

Rated voltage: 36VDC

No-load speed: 4800 ±10% RPM

No-load current: 0.5A

Torque: 0.22Nm

Rotational speed: 4000±10% RPM

Output power: 92W

BACK EMF constant: 7.5V/KRPM

Torque constant: 0.072Nm/A

Insulation class: B

Shaft diameter - Ø8

Weight: 0.700 kg.

Model: 86BLS125

Class: two-shaft

Number of poles: 8

Interphase resistance: 0.09 ohms

Rated voltage: 48VDC

No-load speed: 3700 ±10% RPM

No-load current: 2.8A

Torque: 2.1Nm

Rotational speed: 3000±10% RPM

Output power: 660W

BACK EMF constant13V/KRPM

Torque constant: 0.124Nm/A

Insulation class: B

Front shaft diameter - Ø14

Rear shaft diameter - Ø5

Weight: 4.00 kg.

Breakout board for ETH motion card – EXETHMC is a breakout board designed for use with the ETH-MC controller board. Multiple inputs and outputs are brought out via user-friendly screw terminals with a 3.5mm pitch. All inputs/outputs are labelled in accordance with the pins on the controller board, brought out on connectors CON3, CON4, CON5, CON6. Supply voltages V+ (controller board supply voltage), 12V, 5V and VDD (3.3V) are brought out on screw terminals. The board features 3 opto-isolated inputs, 1 opto-isolated output, and an analogue voltage of 0-10V for spindle control.

*Note: The terminals are pre-populated for 16 inputs and 16 outputs, which is more than sufficient for most machines. Optocouplers (package SFH620) are not installed in the sockets, nor is an operational amplifier (package LM358). When installing the operational amplifier and using the 0-10V voltage, it is necessary to adjust the voltage using potentiometer P1.

Model - EXPCC1010CDC

Inner height – 10 mm

Inner width – 10 mm

Outer height – 13.5 mm

Outer width – 17.7 mm

Bending radius – 28 mm

Hole spacing – 8 mm

Type – closed

Tensile strength – 99 MPa

Operating temperature – from - 40℃ to +60℃

Material – PA66

Length – 1 metre

Weight: 0.200 kg.

Internal height – 10 mm

Internal width – 15 mm

External height – 15 mm

External width – 23 mm

Bending radius - 28 mm

Distance between holes – 20 mm

Type - closed

Tensile strength: 99 MPa

Operating temperature - from -40℃ to +60℃

Material – PA66

Length – 1 metre

Weight: 0.170 kg

Model: EXPCC1825CDC

Inner height – 18 mm

Inner width – 25 mm

Outer height – 24 mm

Outer width – 35.5 mm

Bending radius - 26 mm

Hole spacing – 35 mm

Type - semi-open

Tensile strength: 99 MPa

Operating temperature - from -40℃ to +60℃

Material – PA66

Length – 1 metre

Weight: 0.380 kg.

Model: EXPCC1837ODC

Inner height – 18 mm

Inner width – 37 mm

Outer height – 23.6 mm

Outer width – 48.5 mm

Bending radius - 28 mm

Hole spacing – 25 mm

External open type

Tensile strength: 99 MPa

Operating temperature - from - 40℃ to +60℃

Material – PA66

Length – 1 metre

Weight: 0.500 kg.

Model: EXPCC2538ODC

Inner height – 25 mm

Inner width – 38 mm

Outer height – 35 mm

Outer width – 53 mm

Bending radius - 55 mm

Hole spacing – 52 mm

Type – open on both sides

Tensile strength: 99 MPa

Operating temperature - from - 40℃ to +60℃

Material – PA66

Length – 1 metre

Weight: 0.850 kg.