Categories

Diameter (d) – 32 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 5.900 kg.

Cutting accuracy: ≤ 1 mm

We do not offer processing for this screw size!

Screws under 20 cm are not cut!

Dear customers,

please note that screws and nuts are sold separately!

When ordering a screw and nut set, they are delivered assembled.

If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!

Diameter (d) – 32 mm

Pitch (s) – 10 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 5.900 kg.

Cutting accuracy: ≤ 1 mm

We do not offer processing for this screw size!

Screws under 20 cm are not cut!

Dear customers,

please note that screws and nuts are sold separately!

When ordering a screw and nut set, they are delivered assembled.

If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!

SH-CL86BH is a closed-loop hybrid servo driver for two-phase NEMA 34 stepper motors with encoder feedback. It supports up to 8 A, Step/Dir control, encoder feedback and RS232 configuration.

The current batch is marked on the enclosure for 20–80 VAC or 30–110 VDC supply. Always follow the marking on the specific driver.

Main features:

- Model: THT-U171

- Input signal: 0–10V DC

- Output signal: 4–20mA DC

- Power supply: 12–24V DC (nominal 24V)

- Isolation: three-way galvanic isolation (input/output/power supply)

- Accuracy: ≤ 0.1% of full scale

- Mounting: standard DIN rail

- Operating temperature: -20°C to +60°C

- Response time: < 1ms

- Low current consumption: < 30mA

- Weight: 0.105 kg.

Board specifications:

• Supply voltage 3.7V – 4.2V.

• Current consumption:
  • sleep mode < 2.0mA

  • idle mode < 7.0mA

  • GSM communication (average current): 350 mA

  • GSM communication (peak current): 2000mA

• Communication interface: UART (up to 2.8V) and AT commands

• Socket for SIM card: microSIM

• Supported frequencies: Quad Band (850 / 950 / 1800 /1900 MHz)

• Antenna connector: IPX

• Operating temperature: -40 to + 85 ° C

• Status indication: LED

• Dimensions: 25mm x 23mm

• Weight: 0.026 kg

The shield is based on the quad-band SIM 900 GSM/GPRS module. It enables Arduino to work with GSM and GPRS networks. The shield allows making voice calls, sending SMS messages or establishing connections over the internet. The shield has a switch that selects either a hardware or a software serial port connected to the GPRS shield. If you select the software serial port, you will use a software UART otherwise you will use the hardware UART port of the platform. The shield also includes a high-capacity capacitor intended to supply the real time clock module. If you switch the key to the DBG port, you can connect the port to the Arduino and connect it to a computer for debugging.

D - 28

A - 48

B - 10

L - 38

W - 38

H - 40

X - 5.5

Q - M5 x 1

Basic load rating:

- Dynamic - 666 kg

- Static - 1143 kg

Weight - 0.175 kg.

d - 15

D - 28

A - 48

B - 10

L - 57

W - 38

H - 40

X - 5.5

Q - M6

Basic load rating:

- Dynamic - 554 kg

- Static - 1170 kg

Weight - 0.140 kg.

D - 36

A - 58

B - 10

L - 60

W - 47

H - 44

X - 6.6

Q - M5 x 1

Basic load rating:

- Dynamic - 749 kg

- Static - 999 kg

Weight - 0.350 kg.

d - 20

D - 36

A - 58

B - 10

L - 57

W - 47

H - 44

X - 6.6

Q - M6

Basic load rating:

- Dynamic - 764 kg

- Static - 1758 kg

Weight - 0.190 kg.

A - 40

W - 32

B - 8

L - 35

d - 12

D - 22

H - 30

Weight - 0.100 kg.

A - 48

W - 38

Q - M6

B - 10

L - 50

d - 16

D - 28

H - 40

Weight - 0.160 kg.

A - 48

W - 38

Q - M6

B - 10

L - 57

d - 16

D - 28

H - 40

Weight - 0.170 kg.

A - 48

W - 38

Q - M5

B - 10

L - 56

d - 16

D - 28

H - 40

Weight - 0.220 kg.

A - 58

W - 47

Q - M6

B - 10

L - 50

d - 20

D - 36

H - 44

Weight - 0.273 kg.