Categories

Model: DUPS20

Device type: DC-UPS module for DIN rail

Input voltage: 24 ~ 29 V DC

Output voltage: 24 V DC

Maximum output current: 20 A

Battery charging current: 2 A

Output frequency: 47 ~ 63Hz

Mounting: DIN rail (TS35/7.5 or TS35/15)

Cooling: Free air convection, fanless

Operating temperature range: –30°C ~ +70°C

Dimensions: 40 × 125.2 × 113.5 mm

Weight: 0.380 kg.

Board specifications:

• Input voltage: 5V USB or 7-12VDC input jack

• Connector types: USB-B or DC connector 5.5x2.1mm

• Microcontroller: ATmega2560 – 8-bit, 16MHz frequency

• Programmable flash memory: 256kb

• EEPROM memory: 1kb

• SRAM memory : 8kb

• Analog inputs: 16 units, 10-bit ADC

• Digital input/output pins: 54 (14 of which are with PWM)

• UART ports: 4 hardware serial ports, 1 of which is connected to a chip for USB communication

• Maximum allowable current on input/output pin: 20mA

• Chip for USB communication : Atmega16U2, programmed as USB to Serial

• Buttons: RESET button for easy restart

• Dimensions: 73mm x 54mm x 17mm

• Weight: 0.026 kg

W - 20                         N - 5.5

B - 15                          L1 - 18.9

L - 28.9                       Mxl - M 3x3

H - 10                         H2 - 1.8

B1 - 2.5                      Gn - Ø 1.4

H1 - 2                         C - 10

Weight - 0.020 kg.

Mounting bolt - M3/8

Dynamic load: 0.19 ton

Static load: 0.26 ton

Polyester sock knitting machine with seamless toe closing

A new-generation professional machine designed for manufacturers seeking high speed, flawless precision and automation.
✔ 6-step electronic lifting
✔ 4 independent pickers – 3D effects, heel, toe
✔ AutoToe™ seamless closing
✔ 25+ yarn sensors
✔ Aspirator 2.2 kW
✔ Cylinder 3"¾ / 156 needles

Ideal for mass production of high-quality polyester socks.

Material: Aluminium

Dimensions: 61 x 147 x 155mm

Mounting brackets - YES

Material: Aluminium

Dimensions: 27.2 x 78 x 90mm

Mounting brackets - YES

Suitable for stepper motors:

- Nema 17 (42 mm)

- Nema 23 (57 mm)

- Nema 34 (86 mm)

Material: Steel

Colour: Black

Shape: L-shape 90^°

Sensor specifications:

• Supply voltage: 5V
• Rated current: 150mA
• Measurement range: 300-10000ppm
• Operating temperature: -10 - +50 °C
• Dimensions: 40mm x 21mm
• Mounting holes: 2mm

Sensor specifications:

• Supply voltage: 2.5V to 5V

• Nominal current: 170mA

• Maximum current: 600mA (at startup)

• Measurement range: 0.05mg/l – 10mg/l alcohol

• Operating temperature: from -10 to +50 °C

• Dimensions: 40mm x 21mm

• Mounting holes: 2mm

Sensor specifications:

• Supply voltage: 5V

• Rated current: 150mA

• Measurement range: 300-10000ppm

• Operating temperature: -10 - +50 °C

• Dimensions: 40mm x 21mm

• Mounting holes: 2mm

Model - SM86STH150-6204

Frame - Nema 34

Step angle - 1.8° ± 5%

Number of phases – 2

Rated voltage – 3 V

Rated current – 6.2 A

Phase resistance – 0.5 ± 10% Ω

Phase inductance – 5.3 ± 20% mH

Holding torque – 12 Nm

Length - 149 ± 1 mm

Front shaft diameter - Ø14

Rear shaft diameter - Ø5

Weight – 5.000 kg

Model - SM86STH98-4004

Frame - Nema 34

Step angle - 1.8° ± 5%

Number of phases – 2

Operating voltage – 3 V

Operating current – 5 A

Phase resistance – 0.5 ± 10% Ω

Phase inductance – 4.2 ± 20% mH

Torque – 6.8 Nm

Length - 98 ± 1 mm

Front shaft diameter - Ø14

Rear shaft diameter - Ø5

Weight – 4.000 kg

Model - 86HS2180-06

Frame - Nema 34

Step angle - 1.8° ± 5%

Number of phases - 2

Rated voltage - 3.6 V

Rated current - 6 A

Phase resistance - 0.6 Ω ± 0.1 % at 20°C

Phase inductance - 0.8 mH ± 20% at 1k Hz, 1 Vrms

Holding torque - 12 Nm

Insulation resistance - 500V AC, 1 minute

Insulation resistance - 100 MΩ or more

Insulation class - Class B (80K Max.)

Rotor inertia - 4800 g.cm²

Length - 181 mm

Shaft diameter - Ø14 mm

Shaft length - 35 mm

Weight - 5.800 kg

Model – EXNS16

D – 28

B – 52

H – 40

h – 20

E – 12

L – 40

C1 – 8

C2 – 24

P – 40

X – M5

W – 38

Y – M5

Weight - 0.140 kg

Model – EXNS20

D – 36

B – 62

H – 44

h – 22

E – 12

L – 40

C1 – 8

C2 – 24

P – 48

X – M6

W – 47

Y – M6

Weight - 0.165 kg